w1kl4s/quanta-brocade
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

formatting cleanup

Browse Source
This commit is contained in:
BuildTools
2017-12-18 03:43:42 -05:00
parent 5fe3ff6298
commit b2aa7b4c8a
1 changed files with 13 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
documentation/index.md
View File

@@ -151,29 +151,30 @@ ip address 192.168.1.50/24
boot system tftp 192.168.1.49 brocadeimage.bin
```
It will now boot into the full brocade firmware, however we still need to actually flash it to the device flash as well as fix flash permissions by re-flashing the bootloader using Brocade's official bootloader flashing routine:
It will now boot into the full brocade firmware, however we still need to actually flash it to the device flash as well as fix flash permissions by re-flashing the bootloader using Brocade's official bootloader flashing routine:
give the mgmt interface an address so it can contact your tftp server:
```
enable
#give the mgmt interface an address so it can contact your tftp server
conf t
int management 1
ip addr 192.168.1.50/24
exit
write mem
#reflash the bootloader using brocade flash routine, to fix permissions
#Substitute IP's with your tftp server
```
reflash the bootloader using brocade flash routine, to fix permissions, substitute IP's with your tftp server:
```
copy tftp flash 192.168.10.49 brocadeboot.bin bootrom
#reboot the switch so the new bootloader fixes perms
#you won't be able to write to flash until you do this
reboot the switch so the new bootloader fixes perms. You won't be able to write to flash until you do this:
```
reload
#now load and write the firmware
#If your management IP config from earlier didn't save,
#you'll need to redo those steps to give it an IP again
```
If your management IP config from earlier didn't save, you'll need to redo those steps to give it an IP again. Now load and write the firmware:
```
enable
copy tftp flash 192.168.1.49 brocadeimage.bin primary
#It now perfectly matches a stock Brocade Turboiron
#reboot and it will come up on it's own like a stock device
```
It now perfectly matches a stock Brocade Turboiron. Reboot and it will come up on it's own like a stock device:
```
reload
```