From b2aa7b4c8a4fcabb28d43aa653298eb9c9c8ee7b Mon Sep 17 00:00:00 2001 From: BuildTools Date: Mon, 18 Dec 2017 03:43:42 -0500 Subject: [PATCH] formatting cleanup --- documentation/index.md | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/documentation/index.md b/documentation/index.md index 50924f9..a02c6a7 100644 --- a/documentation/index.md +++ b/documentation/index.md @@ -151,29 +151,30 @@ ip address 192.168.1.50/24 boot system tftp 192.168.1.49 brocadeimage.bin ``` -It will now boot into the full brocade firmware, however we still need to actually flash it to the device flash as well as fix flash permissions by re-flashing the bootloader using Brocade's official bootloader flashing routine: - +It will now boot into the full brocade firmware, however we still need to actually flash it to the device flash as well as fix flash permissions by re-flashing the bootloader using Brocade's official bootloader flashing routine: +give the mgmt interface an address so it can contact your tftp server: ``` enable -#give the mgmt interface an address so it can contact your tftp server conf t int management 1 ip addr 192.168.1.50/24 exit write mem -#reflash the bootloader using brocade flash routine, to fix permissions -#Substitute IP's with your tftp server +``` +reflash the bootloader using brocade flash routine, to fix permissions, substitute IP's with your tftp server: +``` copy tftp flash 192.168.10.49 brocadeboot.bin bootrom -#reboot the switch so the new bootloader fixes perms -#you won't be able to write to flash until you do this +reboot the switch so the new bootloader fixes perms. You won't be able to write to flash until you do this: +``` reload -#now load and write the firmware -#If your management IP config from earlier didn't save, -#you'll need to redo those steps to give it an IP again +``` +If your management IP config from earlier didn't save, you'll need to redo those steps to give it an IP again. Now load and write the firmware: +``` enable copy tftp flash 192.168.1.49 brocadeimage.bin primary -#It now perfectly matches a stock Brocade Turboiron -#reboot and it will come up on it's own like a stock device +``` +It now perfectly matches a stock Brocade Turboiron. Reboot and it will come up on it's own like a stock device: +``` reload ```