w1kl4s/quanta-brocade
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update zip folder info

Browse Source
This commit is contained in:
BuildTools
2018-01-27 02:20:19 -05:00
parent 41467596e1
commit ecb0c10ba8
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
documentation/index.md
View File

@@ -20,7 +20,7 @@ The risk of doing this is low and mitigated if you're properly prepared and foll
Firstly grab this [Brocade Firmware Zip](http://brokeaid.com/files/Brocade-TI.zip) - it contains your bootloader, OS, and all the documentation you'll need. We're not promising it will be available here long, so keep it somewhere safe. If you redistribute it, please do not exclude or rename any files (keep it complete).
Start a tftp server and make sure both ```brocadeboot.bin``` and ```brocadeimage.bin``` are being served by your tftp server.
Start a tftp server and make sure both ```brocadeboot.bin``` and ```brocadeimage.bin``` are being served by your tftp server. They can be found in the ```Main Flash``` Folder.
Connect to the serial console port on the switch and open a terminal window (9600 8N1). Also be sure to connect the #1 management port on the switch to a network that has layer 2 access to your tftp server, so it can succesfully retrieve them while in u-boot.
@@ -144,7 +144,7 @@ If it matches, continue on to **Booting Brocade** below - the risky part is over
However if it matches neither, something has failed. We have yet to see this, but just in case you do - be sure you're running the exact commands here, and do the guide again from ```tftpboot 0x100000 brocadeboot.bin``` and onwards until you get the bootloader where it should be. If you follow the commands, it should work.
**Do not reboot or pull power until this is resolved.** If there is not a valid bootloader in that location, it will not boot itself. As a last resort you can try flashing the quanta bootloader back by substituting the uboot.bin in the recovery folder in all the commands mentioning brocadeboot.bin - just use uboot.bin instead. If successful, the output of ```md 0xfff80000 20``` should match the example at the beginning of this guide, then you can reboot.
**Do not reboot or pull power until this is resolved.** If there is not a valid bootloader in that location, it will not boot itself. As a last resort you can try flashing the quanta bootloader back by substituting the uboot.bin in the ```Fastpath Revert``` folder in all the commands mentioning brocadeboot.bin - just use uboot.bin instead. If successful, the output of ```md 0xfff80000 20``` should match the example at the beginning of this guide, then you can reboot.
##Booting Brocade
You now have the Brocade bootloader in the proper section of the PowerPC flash. Now we just need to reboot!
@@ -238,4 +238,4 @@ You'll need to pick up some official Brocade or Foundry optics on ebay, or buy s
###Contributing:
The markdown source for these guides is hosted on [**our Github repo.**](https://github.com/Fohdeesha/quanta-brocade) If you have any suggested changes or additions feel free to submit a pull request.
```Documentation version: v1.6 (01-27-18)```
```Documentation version:```[```v1.7 (01-27-18)```](https://github.com/Fohdeesha/quanta-brocade/commits/master)