w1kl4s/quanta-brocade
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

remove ref to beta v8 image

Browse Source
This commit is contained in:
Jon Sands
2019-03-05 01:15:35 -05:00
parent e1406983ca
commit 0bf369a1df
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
documentation/config.md
View File

@@ -8,7 +8,7 @@
Brocade's CLI is 80% identical to Cisco, with the majority of the differences being related to VLAN configuration. This guide will introduce you to the basics like vlans, SSH, inter-vlan routing, etc. The Layer 3 firmware comes with all ports in VLAN 1 by default, so if you just need layer 2 switching, you can leave the config as-is and use the out of band management port to talk to the switch.
This guide was intended for the v8 layer 3 OS image. Everything should work in the v7 layer 3 image as well, but it's not guaranteed. If you're running the L2 only image from either codetrain, most of these commands will not work.
This guide was intended for the v7.x layer 3 OS image. If you're running the L2 only image from either codetrain, most of these commands will not work.
Please keep in mind that any commands you run take effect immediately - however they have not been saved in flash, so they will disappear on reboot. To commit changes to flash, use the command ```write memory```.