w1kl4s/lab-docu
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

add write mem note

Browse Source
This commit is contained in:
Jon Sands
2018-11-08 02:13:42 -05:00
parent 14ac25a9bc
commit c2710810e1
2 changed files with 7 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

5
documentation/icx7150.md
View File

@@ -1,3 +1,4 @@
# Setting up Brocade ICX7150
## Preparation
@@ -184,7 +185,9 @@ reload
The switch will reload, and the 10gbE ports and everything else will now be functional.
## Saving & Conclusions
Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the following command (you must be at the `enable` level or higher):
Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the `write memory` command. To do so, you must be at the `enable` level or higher.
**Note:** Since you did a `write memory` in the previous section before reloading the switch, there are no changes to save. But just for practice:
```
enable
write memory

4
documentation/icx7250.md
View File

@@ -185,7 +185,9 @@ reload
The switch will reload, and the 10gbE ports and everything else will now be functional.
## Saving & Conclusions
Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the following command (you must be at the `enable` level or higher):
Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the `write memory` command. To do so, you must be at the `enable` level or higher.
**Note:** Since you did a `write memory` in the previous section before reloading the switch, there are no changes to save. But just for practice:
```
enable
write memory