From 2c50de1c6f88f0c013724c7fa644bbba85dc45a0 Mon Sep 17 00:00:00 2001 From: Jon Sands Date: Thu, 8 Nov 2018 02:04:32 -0500 Subject: [PATCH] Add ICX7xxx Licensing Info --- documentation/icx7150.md | 20 ++++++++++++++++++-- documentation/icx7250.md | 21 +++++++++++++++++++-- 2 files changed, 37 insertions(+), 4 deletions(-) diff --git a/documentation/icx7150.md b/documentation/icx7150.md index 1bcc057..876fb7e 100644 --- a/documentation/icx7150.md +++ b/documentation/icx7150.md @@ -5,7 +5,7 @@ Download the ZIP below, which contains the firmware files and documentation you' [```Brocade v8080 Firmware/Docu Zip```](http://fohdeesha.com/data/other/brocade/8080ca.zip) ```SW version: 08080ca``` -```ZIP Updated: 11-03-2018``` +```ZIP Updated: 11-08-2018``` ```MD5: 2768e4dc1ac1a399facf2019dd6a1c3c``` @@ -167,6 +167,22 @@ ip ssh pub-key-file tftp 192.168.1.49 public.key ``` You shouldn't need to be told basic key management if you're following this section, but just in case - copy your private key to the proper location on the *nix machine you'll be SSH'ing from, or if you're on windows, load it using [pageant](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html). Now when you SSH to the switch, it will authenticate using your private key. +## License The Switch +Run the following to unlock all the features of the switch (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. + +``` +exit +license install perpetual 1 2x10gr +conf t +int e 1/3/1 to 1/3/2 +no speed-duplex 1000-full +exit +write mem +exit +reload +``` +The switch will reload, and the 10gbE ports and everything else will now be functional. + ## Saving & Conclusions Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the following command: ``` @@ -276,4 +292,4 @@ You'll need to pick up some official Brocade or Foundry optics on ebay, or buy s ### Contributing: The markdown source for these guides is hosted on [**my Github repo.**](https://github.com/Fohdeesha/lab-docu) If you have any suggested changes or additions feel free to submit a pull request. -```Documentation version:``` [ v1.5 (11-04-18)](https://github.com/Fohdeesha/lab-docu/commits/master) \ No newline at end of file +```Documentation version:``` [ v1.6 (11-08-18)](https://github.com/Fohdeesha/lab-docu/commits/master) \ No newline at end of file diff --git a/documentation/icx7250.md b/documentation/icx7250.md index e600014..47f56b9 100644 --- a/documentation/icx7250.md +++ b/documentation/icx7250.md @@ -5,7 +5,7 @@ Download the ZIP below, which contains the firmware files and documentation you' [```Brocade v8080 Firmware/Docu Zip```](http://fohdeesha.com/data/other/brocade/8080ca.zip) ```SW version: 08080ca``` -```ZIP Updated: 11-03-2018``` +```ZIP Updated: 11-08-2018``` ```MD5: 2768e4dc1ac1a399facf2019dd6a1c3c``` @@ -167,6 +167,23 @@ ip ssh pub-key-file tftp 192.168.1.49 public.key ``` You shouldn't need to be told basic key management if you're following this section, but just in case - copy your private key to the proper location on the *nix machine you'll be SSH'ing from, or if you're on windows, load it using [pageant](https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html). Now when you SSH to the switch, it will authenticate using your private key. +## License The Switch +Run the following to unlock all the features of the switch (10gbE ports, advanced routing, etc). If you are using this switch in a commercial setting or to make money, please purchase a license entitlement from Ruckus. + +``` +exit +license install perpetual 1 8x10g +license install perpetual 1 l3-prem +conf t +interface ethernet 1/2/1 to 1/2/8 +no speed-duplex 1000-full +exit +write mem +exit +reload +``` +The switch will reload, and the 10gbE ports and everything else will now be functional. + ## Saving & Conclusions Whenever you make changes (like above) they take effect immediately, however they are not saved to onboard flash. So if you reboot the switch, they will be lost. To permanently save them to onboard flash, use the following command: ``` @@ -276,4 +293,4 @@ You'll need to pick up some official Brocade or Foundry optics on ebay, or buy s ### Contributing: The markdown source for these guides is hosted on [**my Github repo.**](https://github.com/Fohdeesha/lab-docu) If you have any suggested changes or additions feel free to submit a pull request. -```Documentation version:``` [ v1.5 (11-04-18)](https://github.com/Fohdeesha/lab-docu/commits/master) \ No newline at end of file +```Documentation version:``` [ v1.6 (11-08-18)](https://github.com/Fohdeesha/lab-docu/commits/master) \ No newline at end of file